Sany Concrete Pump S Valve Fitment Guide

Sany Concrete Pump S Valve Fitment Guide

Sany Concrete Pump S Valve Fitment Guide

This page is built around one verified listing: the S Valve OEM A810301032047. It shows how to route a request for Sany concrete pump spare parts by component system, part number or machine model, and how to confirm fitment before you order sany spare parts for a maintenance, overhaul or replacement job.

S Valve OEM A810301032047 / 11154975 / A810301032055
Route by system

Which system are you replacing?

Start from the group you are working on. Each card names the parts that normally belong to that group and the detail a supplier needs before confirming a match.

System 01

Hopper & S-Valve Group

S valve, hopper, S valve shaft, swinging lever and bearing flange — the parts that move concrete out of the hopper.

Check: the part number on the old valve plus a photo of the shaft and bore.
System 02

Wear Plate / Cutting Ring / Wear Ring

Spectacle wear plate, cutting ring and wear ring form the sealing face the S valve runs against.

Check: whether the mating face is renewed at the same time as the valve.
System 03

Delivery Pipe & Elbows

Concrete delivery pipe, elbows, reducers and clamps that carry the mix from the pump to the pour point.

Check: pipe diameter, wall thickness and end connection type.
System 04

Hydraulic Cylinders & Valves

Pumping cylinders, hydraulic cylinders, rams and control valves that drive the pumping cycle.

Check: bore, stroke and the stamped number on the existing cylinder.
System 05

Electrical & Control Modules

Control boards, motherboards, sensors and switches used in pump control and safety circuits.

Check: the board reference printed on your removed unit, not the machine age.
System 06

Mixing System Components

Agitator shaft, mixing blades and hopper grate parts that keep the mix workable before it enters the valve.

Check: shaft diameter and blade fitting pattern against the old assembly.

Additional model mappings are added only after confirmation by part number or original dimensions.

Concrete pump S valve body and mating face used to verify a part number
Worked example

What does the part number tell you?

Use the number stamped on the removed part as the starting point, then match it to the filed record for the listing. For A810301032047 the page states the following, and nothing more:

  • Part NumberA810301032047
  • Product TypeConcrete Pump S Valve
  • CategoryConcrete Pump Spare Parts
  • ApplicationConcrete Pump
  • ConditionNew
  • SupplierCZIC GROUP-PUMP PARTS

Numbers to read carefully: the listing title also shows 11154975 and A810301032055, while the specification table and every paragraph of body text reference only A810301032047. The page does not explain the difference, so treat the three numbers as a question to settle with your own machine record — not as interchangeable order codes.

The same listing states that exact machine compatibility should be confirmed by part number, machine model or original part dimensions before ordering.

Open the A810301032047 Listing
Published record

What are the published specifications?

These are the fields the listing actually publishes for the S Valve. Anything outside this table — material grade, hardness, service life — has not been released on the page.

Product NameS Valve
Part NumberA810301032047
Product TypeConcrete Pump S Valve
CategoryConcrete Pump Spare Parts
ApplicationConcrete Pump
ConditionNew
QualityHeavy-Duty / High Quality
SupplierCZIC GROUP-PUMP PARTS

Not published: specific material grade, hardness and service-life figures for A810301032047. The page states these should only be published once the corresponding technical specification is confirmed — so plan replacement intervals from your own duty and inspection records.

S Valve A810301032047 concrete pump spare part viewed from the side

Five features the listing states for this valve

  • Heavy-Duty ConstructionDesigned for demanding concrete pumping environments and repeated pumping cycles.
  • Wear-Resistant DesignSuitable where components are continuously exposed to abrasive concrete.
  • Accurate FitManufacturing accuracy matters for correct installation and coordination with mating components.
  • Stable Pumping PerformanceA properly matched valve helps maintain consistent transfer between the pumping cylinders and the delivery line.
  • Replacement SolutionIntended for maintenance, overhaul and replacement projects when A810301032047 matches the required number and specification.
Match the job

Which scenario matches your pump?

Each situation below pairs a published fact about A810301032047 with the decision it should drive before you place an order.

S Valve A810301032047 supplied for concrete pump maintenance and overhaul

Weak transfer or concrete leaking back

The page states the valve works with the wear plate, cutting ring and related hopper components and helps reduce unnecessary leakage when the pumping system is correctly maintained.

Decision: inspect the mating face and replace the wear plate and cutting ring with the valve if the seal surface is scored.

Scheduled overhaul or planned shutdown

The listing describes the part as a replacement solution suitable for concrete pump maintenance, overhaul and replacement projects when A810301032047 matches the required part number and specification.

Decision: order against the number on the old unit and stock the shaft, swinging lever and bearing flange at the same time.

High-cycle, abrasive concrete duty

Heavy-duty construction and a wear-resistant design are stated for repeated pumping cycles and continuous exposure to abrasive concrete. No hardness or service-life figure is published.

Decision: set your own inspection interval from duty data, since no in-service wear figure is published for this number.
Before the quote

What do we need from you?

Quotes are built from the details you send, so a complete enquiry gets an accurate answer the first time. The listing asks for the following information.

  1. Part number — for this listing, A810301032047. Quote it exactly as stamped.
  2. Product — the component name, for example Concrete Pump S Valve.
  3. Machine model — if you have it, so fitment can be cross-checked.
  4. Quantity — one-off replacement or a stocked overhaul programme.
  5. Destination — country and city, for delivery planning.
  6. Photos (optional) — of the original S valve or the surrounding equipment.
Quote-based orderingAdd items to a quote list or request a quote directly from the product page.
Payment termsThe site states payment can be sent by T/T or L/C.
Supply scopeSupplier range covers concrete pump parts, mixer spare parts and batching plant spare parts.
Send Your Part Number

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

How to Replace a Sany S Valve in a Concrete Pump Hopper

Replacing a Sany S valve in a concrete pump hopper is a timing decision as much as a mechanical job, because the sealing result depends on the valve and the wear pair around it.

Read article

Sany Concrete Pump Spare Parts Supplier for Bulk Overhaul Programs

Sourcing Sany concrete pump spare parts for a bulk overhaul program requires verifying part coverage, factory capacity, export readiness, and inquiry discipline before comparing quotations.

Read article

Sany Spare Parts Dealer for Concrete Pump Wear Parts

Dealer supply for Sany concrete pump wear parts holds together when the S valve, spectacle wear plate, and cutting ring are planned as one stock group, ordered by part number, and shipped in a…

Read article

Frequently Asked Questions

which part number does this s valve listing cover?

the specification table and all body text reference a810301032047. the listing title also shows 11154975 and a810301032055, and the page does not explain the difference, so confirm which number matches your machine before ordering.

how do i confirm the s valve fits my machine?

the listing states that exact machine compatibility should be confirmed by part number, machine model or original part dimensions before ordering. send the number stamped on your old valve, your machine model and a photo of the removed part.

what job does the s valve do in the pumping system?

it directs concrete from the pumping cylinders into the delivery pipeline, alternates between the left and right concrete cylinders, and works with the wear plate, cutting ring and related hopper components. a correctly matched valve helps maintain consistent transfer and reduces unnecessary leakage when the system is properly maintained.

are material grade, hardness or service-life figures published?

no. the page states that material grade, hardness and service-life figures for a810301032047 should only be published once the corresponding technical specification is confirmed. plan replacement intervals from your own duty and inspection records.

which other parts are usually renewed with the s valve?

the page lists the spectacle wear plate, cutting ring, wear ring, s valve shaft, swinging lever, bearing flange, hopper, mixing system components, concrete delivery pipe and concrete pump piston or ram as related components.

what information should i send to get a quote?

send the part number (a810301032047), the product you need, your machine model if available, quantity and destination country or city, plus optional photos of the original s valve or surrounding equipment. orders are handled through the get a quote and add to quote list paths on the product page.

Leave a message
Name
Email *
Message
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us