Introduction: To choose a concrete pump delivery cylinder, first confirm that the part is a delivery cylinder on the concrete circuit, not a drive cylinder. Then match the OEM number and the bore × stroke marked on the removed cylinder or on the parts list. Order an aftermarket replacement from that OEM number and size. Do not order by bore alone, and do not guess from the pump brand.
A concrete pump delivery cylinder is a concrete-pump part. The same words can describe other products in other industries, so identify it from the machine nameplate and the number on the cylinder.
On a two-cylinder concrete pump, the delivery cylinders are the two tubes on the concrete circuit. Concrete is drawn into each cylinder and pushed toward the valve, then into the pipeline.
The valve that switches between those two cylinders may be an S-valve or a rock valve. That difference is explained in S-Valve vs Rock Valve on a Concrete Pump. On many hopper-valve pumps, a spectacle wear plate sits at the openings that lead to the two delivery cylinders, as described in Concrete Pump Spectacle Wear Plate and Cutting Ring: When to Replace Them as a Set.
The delivery cylinder is not the delivery piston that travels inside it, and it is not the valve in front of it. Order each item by its own OEM number.
A delivery cylinder and a drive cylinder are different parts on a concrete pump, and they are not interchangeable.
Catalogs may also list other cylinders under names such as plunger cylinder or shift cylinder. Those are different items again. If a parts list or a stamping only says "cylinder," do not assume it is a delivery cylinder. Read the full part name and the OEM number, or send a photo of the marking and the machine nameplate before you order.
Two delivery cylinders can look similar and still differ in bore, stroke, or OEM number. Appearance is not a fitment method, and a matching bore is not enough.
Identify the cylinder from:
Confirmed aftermarket listings on this site show why the full size and the OEM number both matter. 087806007 is a delivery cylinder 120x700 for a Putzmeister concrete pump. 081123003 is 150x1000. 239964001 is 180x1400. Those are three different parts. A 180x1400 cylinder is not a substitute for a 150x1000 or a 120x700 cylinder, and you should not swap by bore alone — two cylinders can share a bore and still have different strokes and different OEM numbers.
These examples are not a complete size list. Other pumps use other OEM numbers and other bore × stroke combinations. A size reference such as 230 mm still has to be confirmed against the OEM number and the full marked length on the part or the parts list for the machine in front of you.
Start with the markings, not with a tape measure. The size that matters for ordering is the OEM number and the bore × stroke already recorded for that part.
If the OEM number and the size marking are still readable, use those. If the stamping is worn or missing, do not guess and do not order from a single diameter reading. Photograph the removed cylinder from both ends, including any partial stamp, and send those photos with the pump nameplate details. A supplier can then compare the part with the parts list. Any measurement you take is only a reference for that comparison; it is not, by itself, an order identity.
A complete request is faster to quote and less likely to mix a delivery cylinder with a drive cylinder, or one size with another. Include:
If an OEM number is no longer readable, say so and send the photos and the nameplate details. Do not ask the supplier to guess from the brand or from a similar-looking cylinder.
Choose a concrete pump delivery cylinder by confirming it is a delivery cylinder, not a drive cylinder, then matching the OEM number and the bore × stroke on the removed part or the parts list. Order an aftermarket replacement from that identity, not from appearance or from bore alone.
Q: What is a concrete pump delivery cylinder?
A: It is one of the two tubes on the concrete circuit of a two-cylinder concrete pump. Concrete is drawn into the cylinder and pushed toward the valve and the pipeline. It is a concrete-pump part, not a gas-cylinder or parcel-delivery item. Identify it by the OEM number and the bore × stroke, not by appearance.
Q: Is a delivery cylinder the same as a drive cylinder on a concrete pump?
A: No. A delivery cylinder is on the concrete circuit and is the tube the concrete piston runs in. A drive cylinder is a different part, usually on the hydraulic side, that moves the piston rod. The two are not interchangeable. If the name on the part is unclear, send a photo of the marking and the machine nameplate before you order.
Q: How do I choose the correct concrete pump delivery cylinder size?
A: Read the OEM number and the bore × stroke from the removed cylinder or from the parts list, and confirm them against the pump nameplate. Listings on this site, such as 087806007 in 120x700, 081123003 in 150x1000, and 239964001 in 180x1400, are different parts. Do not order by bore alone, and do not treat any one size as a universal standard.
Q: How do I measure a concrete pump delivery cylinder?
A: Use the OEM number and the size already marked on the cylinder or listed in the parts list. If those markings are unreadable, photograph the removed cylinder and the machine nameplate and ask the supplier to confirm the part against the parts list. Do not order from a single diameter measurement.
Q: Can I replace a delivery cylinder by matching only the bore?
A: No. Two cylinders can share a bore and still differ in stroke and OEM number. Confirm the full bore × stroke and the OEM number. If either is missing, send photos and the nameplate details rather than substituting a cylinder that only looks close.
Q: What should I send when I request a quote?
A: Send the pump brand and model, the serial if you have it, the OEM number on the old delivery cylinder, the bore × stroke if it is marked, and photos of both ends of the removed part and of the nameplate. State that you need a replacement delivery cylinder for a concrete pump. If a number is unreadable, say so and let the photos and nameplate carry the identification.
Putzmeister, Schwing, SANY, CIFA, and Zoomlion are trademarks of their respective owners. The parts described here are aftermarket replacements, not OEM parts made by those manufacturers. Brand names and OEM numbers are used for reference only.