Introduction: A DURO 22 wear plate and a carbide wear plate can both be spectacle wear plates on a concrete pump, but they are not the same part. The names point to different material grades or catalog designations. Match the OEM number and the material mark on the removed plate or the parts list, then order an aftermarket replacement from that identity. Do not swap the two by DN, outline, or a shared size mark alone, and do not guess from the pump brand.
A spectacle wear plate is a concrete-pump part: a plate with two openings, fitted at the hopper openings that lead to the delivery cylinders on many S-valve pumps. It is not an eyeglass part. Whatever material is listed, the plate still runs against a cutting ring or wear ring. When either contact face is worn, they are usually replaced as a set, as explained in Concrete Pump Spectacle Wear Plate and Cutting Ring: When to Replace Them as a Set.
DURO 22 is a catalog material grade used on some concrete pump wear parts, including spectacle wear plates. It describes the grade marked for that plate. It is not, by itself, a complete order identity.
A confirmed aftermarket example on this site is 261122002, a DURO 22 spectacle wear plate in DN230 for a Putzmeister concrete pump. Listings commonly also cross-reference this OEM as C00178700. Buyers may search for a Putzmeister DURO 22 wear plate; use the brand name only as a reference, then confirm the OEM number and DN on the part or the parts list for the machine in front of you.
Other pumps and other sizes use other OEM numbers, including other DURO 22 plates. A plate marked DURO 22 is not a universal substitute for every DURO 22 listing.
Some concrete pump spectacle wear plates are listed as carbide wear plates. Carbide is a different material designation from DURO 22. As with DURO 22, the word "carbide" is not a complete order identity.
A confirmed aftermarket example is 276312001, a carbide wear plate in DN230 for a Putzmeister concrete pump. It is a spectacle wear plate for hopper / S-valve service that specifies this OEM. It shares the DN230 size class with 261122002, but it is a different OEM number and a different material listing.
This site also lists 538317 as an aftermarket spectacle wear plate for a Putzmeister concrete pump under the catalog designation 540 HM. Some listings title this OEM as a carbide wear plate. Confirm the OEM number and the grade mark on the removed plate or the parts list. 538317 is not the same part as 519314, which is a 540 DURO 22 spectacle wear plate. Do not swap those two because both marks include 540.
This article does not compare hardness, service life, or pumped volume. Those figures vary with the mix, the duty, and the exact part, and they should not be assumed from the material name alone.
The practical difference for ordering is the identity on the plate, not a preference between two generic names.
If the removed plate is marked DURO 22, do not substitute a carbide plate of the same DN unless the parts list for that machine actually calls for that carbide OEM. If the parts list calls for a carbide plate, do not substitute a DURO 22 plate of the same size. When the mark is worn or unclear, send photos and the nameplate details rather than choosing a material by habit.
This is a comparison of the two designations. It is not an official catalog, and it is not a full checklist for choosing every concrete pump wear plate.
Two plates can look alike and still differ in material grade, thickness, mounting, or OEM number. Appearance is not a fitment method, and a matching DN is not enough.
The DN230 examples above show this clearly: 261122002 is a DURO 22 spectacle wear plate; 276312001 is a carbide wear plate. Both are listed in DN230 for Putzmeister concrete pumps, and they are different parts. The 540 mark shows the same rule: 538317 (540 HM) is not a substitute for a 540 DURO 22 plate.
Identify the plate from:
If any of those do not match, do not order by size alone.
A DURO 22 wear plate and a carbide wear plate are different aftermarket identities for concrete pump spectacle wear plates. Use the OEM number and the material mark on the removed plate or the parts list. Do not swap them by DN or by a shared size mark, and do not treat either name as a universal part.
Q: What is a DURO 22 wear plate?
A: DURO 22 is a catalog material grade used on some concrete pump wear parts, including spectacle wear plates. An example on this site is 261122002, a DURO 22 spectacle wear plate in DN230 for a Putzmeister concrete pump, also commonly cross-referenced as C00178700. Order by the OEM number and size, not by the grade name alone.
Q: Should I use a DURO 22 or a carbide wear plate for a concrete pump?
A: Use the designation that matches the removed plate or the parts list. If the old plate or the list is marked DURO 22, order that OEM. If it specifies a carbide wear plate, order that OEM. Do not choose between them by size or by a general preference. If the mark is unreadable, send photos and the nameplate details.
Q: What is the difference between a DURO 22 and a carbide wear plate?
A: They are different material designations for concrete pump spectacle wear plates, and they have different OEM numbers. A shared DN, such as DN230, does not make 261122002 and 276312001 interchangeable. This article does not assign hardness or service-life figures to either name.
Q: When should I choose a carbide wear plate for a concrete pump?
A: When the removed plate or the parts list specifies a carbide wear plate, or the carbide OEM, for that machine — not simply because a carbide listing shares the same DN as a DURO 22 plate. Confirm the OEM number before you order.
Q: Can I replace a DURO 22 spectacle wear plate with a carbide plate of the same size?
A: Not by size alone. Confirm that the parts list for the machine calls for that carbide OEM. The same rule applies in the other direction, and to shared marks such as 540. If you are unsure, send the OEM number, photos, and the nameplate details.
Q: What should I send when I request a quote?
A: Send the pump brand and model, the serial if you have it, the OEM number on the old spectacle wear plate, any material or grade mark and any DN or size marking, and photos of both faces and of the nameplate. State that you need an aftermarket replacement spectacle wear plate for a concrete pump. If a number or mark is unreadable, say so and let the photos and nameplate carry the identification.
Putzmeister, Schwing, SANY, CIFA, and Zoomlion are trademarks of their respective owners. The parts described here are aftermarket replacements, not OEM parts made by those manufacturers. Brand names and OEM numbers are used for reference only.