To match a Schwing cutting ring, start with the OEM number, not the DN size. Read the number from your machine's parts list or the removed ring, then confirm the DN size, the version, and the wear plate the ring runs against. DN tells you the size of the ring position. It does not tell you which of several Schwing cutting rings your concrete pump needs. Order the aftermarket replacement by the OEM number you confirmed.
This guide explains what the cutting ring does on a Schwing concrete pump, how DN and OEM numbers relate, what to read on the old part, and what to send with a quote request. For the general terms, see How to Identify a Concrete Pump Cutting Ring (and Wear Ring).
The cutting ring is a wear part at the concrete pump's valve. It works against the wear plate at the openings to the delivery cylinders, and the two parts form the sealing and wear face there. Because they wear against each other, the ring and the plate are usually inspected together.
Schwing parts lists use the name cutting ring. Some buyers search for a Schwing wear ring and mean the same position. The name alone does not settle fitment; the OEM number does.
Schwing concrete pumps can use different valve designs, and a valve assembly has its own set of related parts. For example, the DN210 cutting ring 10063939 is listed on this site together with the DN210 rock valve 10059467 and the DN210 pressure spring 10064472. If you are not sure which valve your pump has, S-Valve vs Rock Valve on a Concrete Pump explains the difference.
The OEM number decides the match. DN is a size reference, and it is useful as a cross-check, but it is not a part identity.
If your DN and your OEM number seem to disagree, trust neither until you check the parts list for your pump's serial number.
These product pages show how Schwing cutting rings are identified by OEM number first, then size:
Each example has its own OEM number. Do not swap one for another because the DN looks close, and do not choose a ring from this list without checking the number on your own parts list.
The cutting ring and the wear plate work together but are separate parts with separate OEM numbers. For example, 30391048 is a Schwing wear plate (dynamic), and 30391049 is a cutting ring. They are not the same part.
When the ring is worn, look at the plate as well. When either part changes, check that the ring and plate numbers still belong together on your parts list. The reasons to replace both at once are covered in Concrete Pump Spectacle Wear Plate and Cutting Ring: When to Replace Them as a Set.
Other parts at the valve, such as a pressure spring, also have their own OEM numbers. Order them as separate items.
If a number is worn away or the parts list is missing, say so. The nameplate, the photos, and the plate number are better than a guessed OEM number.
Send the pump brand, model, and serial number; the OEM number of the cutting ring and of the wear plate; the DN size from the parts list; any version note; and photos of the old ring. State that you need an aftermarket replacement Schwing cutting ring for a concrete pump. We check the OEM number and size against our records before we quote.
A Schwing cutting ring is matched by its OEM number. DN size, the ring version, and the matching wear plate are checks that confirm the number. They do not replace it. Read the parts list for your pump's serial number, compare it with the old ring, and order by the confirmed OEM number.
Q: How do I find the right Schwing cutting ring for my concrete pump?
A: Read the pump model and serial number from the nameplate, find the cutting ring OEM number in the parts list for that serial number, and confirm the DN size and the matching wear plate. Order by that OEM number.
Q: Can I replace a Schwing cutting ring by DN size only?
A: No. DN is a size reference. Different ring versions can share a DN, and some rings are listed by OEM number only. Confirm the OEM number before you order.
Q: Is a Schwing wear ring the same as a cutting ring?
A: Some buyers use wear ring for the same position, but Schwing parts lists use the name cutting ring. Whatever the name, the OEM number on the parts list identifies the part.
Q: What is the difference between a Schwing cutting ring and a wear plate?
A: They are two separate parts that wear against each other at the valve. Each has its own OEM number. For example, 30391048 is a wear plate and 30391049 is a cutting ring.
Q: Which Schwing cutting ring sizes are listed on this site?
A: Examples include 10166890 in DN230, 30391049 in DN165, and 10063939 in DN210. 10181916 is listed by OEM number, and its size is confirmed before quoting.
Q: What should I send for a Schwing cutting ring quote?
A: The pump brand, model, and serial number; the OEM numbers of the cutting ring and wear plate; the DN size; any version note; and photos of the old ring.
Schwing, Putzmeister, SANY, CIFA, and Zoomlion are trademarks of their respective owners. The parts described here are aftermarket replacements, not OEM parts made by those manufacturers. Brand names and OEM numbers are used for reference only.