Categories

How to Choose a Concrete Pump Wear Plate

Nov 18th,2026 10 Views

To choose a concrete pump wear plate, identify the part before you compare offers. Read the OEM number from the pump's parts list or the removed plate, then confirm the size or series mark, the material or grade mark, and the cutting ring the plate runs against. A wear plate that looks the same, or shares the same DN, can still be a different part. Order the aftermarket replacement by the OEM number you confirmed, and use the other marks as checks.

This guide is a fitment checklist. It covers where the wear plate sits on a concrete pump, the marks that identify it, how to handle cross-reference numbers, and what to send with a quote request. It is not a brand catalog, and it does not compare wear plate materials in detail.

What Is a Concrete Pump Wear Plate?

On a concrete pump, the wear plate sits at the valve, at the openings that lead to the delivery cylinders. The cutting ring (some catalogs say wear ring) works against it, and the two parts form the sealing and wear face at the valve. On many S-valve pumps the plate has two openings and is called a spectacle wear plate.

Catalogs use several names for this position: wear plate, spectacle wear plate, spectacle plate, or a name with a version word such as dynamic. The name helps you find the right page in the parts list. It does not tell you which plate your pump needs. If you are not sure which valve design your pump uses, S-Valve vs Rock Valve on a Concrete Pump explains the difference.

What Decides the Right Wear Plate?

The OEM number decides the match. Every other mark is a cross-check:

  • OEM number. The part number in the parts list for your pump's serial number, or the number marked on the removed plate. This is the order code.
  • Size or series mark. Some plates are marked by DN, for example DN230. Others use a series or model mark, for example S8 or S9 on CIFA wear plates. Some listings give no size at all and confirm it at the quote stage.
  • Material or grade mark. Some plates carry a grade name such as DURO 22, or are listed as carbide. Two plates of the same size can have different grade marks and different OEM numbers.
  • Matching cutting ring. The plate and the ring work as a pair. Note the ring's OEM number too.

If two of these marks disagree, for example the DN fits but the grade mark does not, stop and check the parts list before you order.

Wear Plate Examples: Same Job, Different Identities

These product pages show why the OEM number comes first:

  • 261122002 is listed as a DN230 DURO 22 spectacle wear plate for a Putzmeister concrete pump. It is cross-referenced as C00178700, and the catalog form 261122.002 also appears. Its listed mate is the DN230 wear ring / cutting ring 261123001.
  • 276312001 is listed as a carbide DN230 wear plate for a Putzmeister concrete pump (catalog form 276312.001). It shares the DN230 size with 261122002, but it is a different OEM number and a different material listing.
  • 227300 is listed as an S8 wear plate (spectacle plate) for a CIFA concrete pump. The S9 plate, 245228, is a separate part.
  • 30391048 is listed as a Schwing wear plate (dynamic). Its size is confirmed at the quote stage, and it pairs with a cutting ring such as 30391049.

Two Putzmeister plates in DN230 and two CIFA plates in different series show the same rule: do not pick a wear plate by brand and size alone.

How to Choose a Concrete Pump Wear Plate Step by Step

  1. Read the nameplate. Note the pump brand, model, and serial number.
  2. Find the OEM number. Use the parts list for that serial number, or the number stamped on the removed plate.
  3. Check every number form. Catalogs can print the same number with or without a dot (for example 261122002 and 261122.002), and some plates also have a cross-reference number. Write down every number you find.
  4. Confirm the size or series mark. Compare the DN or series mark on the parts list with the old plate.
  5. Note the material or grade mark. If the old plate or the parts list shows DURO 22, carbide, or another grade, keep that grade unless the parts list for your pump calls for a different OEM number.
  6. Note the matching cutting ring. Record its OEM number and check that the ring and plate belong together on your parts list.
  7. Photograph the old plate. Take photos of both faces and any stamped marks.

If the number is worn away or the parts list is missing, say so. The nameplate details, the ring number, and clear photos are better than a guessed OEM number.

Should You Change the Cutting Ring at the Same Time?

Check the cutting ring whenever you change the wear plate, because the two parts wear against each other. The CIFA 227300 listing, for example, advises changing the plate and the cutting ring together. The reasons are covered in Concrete Pump Spectacle Wear Plate and Cutting Ring: When to Replace Them as a Set. To identify the ring itself, see How to Identify a Concrete Pump Cutting Ring (and Wear Ring).

DURO 22 or Carbide?

Choose the grade your OEM number calls for. A DURO 22 plate and a carbide plate of the same DN are different parts with different OEM numbers, so do not swap one for the other to save time or money without checking the parts list. The difference between the two designations is explained in DURO 22 Wear Plate vs Carbide Wear Plate for Concrete Pumps.

What to Send When You Request a Quote

Send the pump brand, model, and serial number; the OEM number of the wear plate, including any cross-reference or dotted catalog form; the size or series mark; the material or grade mark; the OEM number of the matching cutting ring; and photos of the old plate. State that you need an aftermarket replacement wear plate for a concrete pump. We check the OEM number and size against our records before we quote.

Conclusion

Choosing a concrete pump wear plate comes down to one identity: the OEM number for your pump. Size or series, material grade, and the matching cutting ring confirm that number. They do not replace it. Read the parts list for your serial number, compare it with the old plate, and order by the confirmed OEM number.

FAQ

Q: How do I choose the right wear plate for my concrete pump?

A: Read the pump model and serial number from the nameplate, find the wear plate OEM number in the parts list for that serial number, and confirm the size or series mark, the material or grade mark, and the matching cutting ring. Order by the OEM number.

Q: Can I order a concrete pump wear plate by DN size only?

A: No. Different plates can share a DN. For example, 261122002 (DURO 22) and 276312001 (carbide) are both listed in DN230 for Putzmeister concrete pumps, and they are different parts.

Q: Is a spectacle wear plate the same as a wear plate?

A: On many S-valve concrete pumps, the wear plate has two openings and is called a spectacle wear plate or spectacle plate. The name varies by catalog; the OEM number identifies the part.

Q: What if my wear plate has two different numbers?

A: Many plates have a cross-reference number or a dotted catalog form, for example 261122002, 261122.002, and C00178700. Send every number you find, and the match is checked before quoting.

Q: Should I replace the wear plate and cutting ring together?

A: Check both every time, because they wear against each other. Many buyers change them as a set. Order each part by its own OEM number.

Q: What should I send for a wear plate quote?

A: The pump brand, model, and serial number; the wear plate OEM number and any cross-reference; the size or series mark; the grade mark; the cutting ring OEM number; and photos of the old plate.

Related examples

Putzmeister, Schwing, SANY, CIFA, and Zoomlion are trademarks of their respective owners. The parts described here are aftermarket replacements, not OEM parts made by those manufacturers. Brand names and OEM numbers are used for reference only.

Leave a message
Name
Email *
Message
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us