Categories

Carbide Wear Plate for Concrete Pumps: What Buyers Should Verify

Nov 19th,2026 5 Views

A carbide wear plate for a concrete pump is identified by its OEM number, not by the word "carbide" or by size alone. Before you order an aftermarket replacement, verify the OEM number, the DN or other size mark, and the material or grade mark on the removed plate or the parts list. Do not swap a carbide plate with another grade that only shares the same DN.

This article is a verification checklist for carbide spectacle wear plates used on concrete pumps. It does not compare material grades in detail, and it does not assign hardness or service life. For the difference between a DURO 22 plate and a carbide plate, see DURO 22 Wear Plate vs Carbide Wear Plate for Concrete Pumps. For a general wear-plate fitment checklist, see How to Choose a Concrete Pump Wear Plate.

What Is a Carbide Wear Plate on a Concrete Pump?

On a concrete pump, a carbide wear plate is a wear plate — often a spectacle wear plate — listed under a carbide material designation. A spectacle wear plate is a concrete-pump part with two openings, fitted at the hopper openings that lead to the delivery cylinders on many S-valve pumps. It is not a generic industrial carbide plate, and it is not an eyeglass part.

The plate runs against a cutting ring or wear ring. When you change the plate, check the ring as well; the two parts are often replaced as a set, as explained in Concrete Pump Spectacle Wear Plate and Cutting Ring: When to Replace Them as a Set.

The word "carbide" is a material listing. It is not a complete order identity.

What Buyers Should Verify

Check these points against the removed plate and the parts list for your pump's serial number:

  1. OEM number. This is the order code. Write down every form you find, including a dotted catalog form such as 276312001 and 276312.001.
  2. Size mark. Many carbide plates are listed by DN, for example DN230. Confirm that the size on the parts list matches the old plate. Size alone does not identify the part.
  3. Material or grade mark. Look for "carbide" or another grade on the old plate or in the parts list. Keep the designation that belongs to that OEM number.
  4. Matching cutting ring. Record the ring's OEM number and confirm that the plate and ring belong together on your parts list.
  5. Photos. Photograph both faces of the old plate and any stamped marks.

If the DN matches but the grade mark or OEM number does not, stop and check the parts list before you order.

Same DN Is Not the Same Part

Two confirmed examples on this site show why size is only a check:

  • 276312001 is listed as a carbide wear plate in DN230 for a Putzmeister concrete pump (catalog form 276312.001). It is a spectacle wear plate for hopper / S-valve service.
  • 261122002 is listed as a DURO 22 spectacle wear plate in DN230 for a Putzmeister concrete pump. It is commonly cross-referenced as C00178700, and the catalog form 261122.002 also appears.

Both are DN230 plates for Putzmeister concrete pumps, and they are different OEM numbers with different material listings. Do not treat the carbide listing as a substitute for the DURO 22 listing because the DN is the same.

When a Listing Says Carbide and the Catalog Uses Another Name

Some listings title a plate as a carbide wear plate, while the catalog uses a different grade name. Confirm the OEM number and the mark on the removed plate or the parts list; do not assume that every "carbide" title is the same designation.

A confirmed example is 538317. This site lists it as an aftermarket spectacle wear plate 540 HM for a Putzmeister concrete pump. The product URL, and some listings, still use the carbide wear plate name for this OEM. Check the OEM number and the 540 HM mark. 538317 is not the same part as 519314, which is a 540 DURO 22 spectacle wear plate. Do not swap those two because both marks include 540.

This article does not compare hardness, service life, or pumped volume, and it does not treat HM as another name for carbide.

Can You Replace a DURO 22 Plate with a Carbide Wear Plate?

Only if the parts list for your pump's serial number calls for that carbide OEM number. Do not replace a DURO 22 plate with a carbide plate of the same DN to save time or money, and do not do the reverse, without that check. The designations, and why they are not interchangeable by size, are explained in DURO 22 Wear Plate vs Carbide Wear Plate for Concrete Pumps.

If the mark is unreadable, send photos and the nameplate details rather than guessing an OEM number.

What to Send When You Request a Quote

Send the pump brand, model, and serial number; the OEM number of the wear plate, including any dotted catalog form or cross-reference; the size mark; the material or grade mark; the OEM number of the matching cutting ring; and photos of the old plate. State that you need an aftermarket replacement carbide wear plate for a concrete pump. We check the OEM number and marks against our records before we quote.

Conclusion

A carbide wear plate for a concrete pump is ordered by the OEM number that belongs to your machine. DN, the carbide or other grade mark, and the matching cutting ring confirm that number; they do not replace it. Verify those marks on the removed plate and the parts list before you order an aftermarket replacement.

FAQ

Q: What should I verify on a carbide wear plate for a concrete pump?

A: Verify the OEM number, the DN or other size mark, and the material or grade mark on the removed plate or the parts list. Also note the matching cutting ring. Order by the OEM number you confirmed.

Q: Can I order a carbide wear plate by DN230 alone?

A: No. DN230 is a size class, not a complete identity. For example, 276312001 is listed as a carbide DN230 wear plate, and 261122002 is listed as a DURO 22 DN230 spectacle wear plate, both for Putzmeister concrete pumps. They are different parts.

Q: Can I replace a DURO 22 wear plate with a carbide wear plate?

A: Not by size alone. Replace it only if the parts list for your pump calls for that carbide OEM number. The difference between the two designations is explained in DURO 22 Wear Plate vs Carbide Wear Plate for Concrete Pumps.

Q: Is a carbide spectacle wear plate the same as a generic carbide wear plate?

A: No. On a concrete pump, a carbide spectacle wear plate is the valve and hopper wear plate with two openings. A generic industrial carbide plate is a different kind of part. Use the concrete-pump OEM number.

Q: Why do some listings call 538317 a carbide wear plate?

A: Some listings use that title for OEM 538317. This site lists it as a spectacle wear plate 540 HM for a Putzmeister concrete pump. Confirm the OEM number and the grade mark; do not assume the title and the catalog name are interchangeable, and do not confuse 538317 with 519314 (540 DURO 22).

Q: What should I send for a quote?

A: The pump brand, model, and serial number; the wear plate OEM number and any other number form; the size mark; the grade mark; the cutting ring OEM number; and photos of the old plate.

Related examples

Putzmeister, Schwing, SANY, CIFA, and Zoomlion are trademarks of their respective owners. The parts described here are aftermarket replacements, not OEM parts made by those manufacturers. Brand names and OEM numbers are used for reference only.

Leave a message
Name
Email *
Message
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us