• 082308005 Delivery Piston Seal Ø 120
  • 082308005 Delivery Piston Seal Ø 120, two pieces
  • 082308005 Delivery Piston Seal Ø 120
  • 082308005 Delivery Piston Seal Ø 120, two pieces

082308005 Delivery Piston Seal Ø 120

No.082308005

Category: Putzmeister Spare Parts

Part Name: Piston Seal DN120

OEM NO.: 082308005

  • Description

  • Payment Method

  • Shipping&Returns

  • Contact Us

Product Overview

A delivery piston seal is the wearing ring on the piston that drives concrete out of the delivery cylinder. This is the DN120 size, OEM 082308005: a 120 mm delivery piston seal for concrete pump delivery cylinders — the seal used on Putzmeister machines that call for the OEM reference in the specification table. It is made to the same nominal diameter as the OEM part, so a worn seal can be changed without touching the piston or the cylinder itself. The seal works at the hardest point in the pumping circuit. Every stroke pushes abrasive aggregate against it at full line pressure, and it wipes back and forth along the cylinder bore thousands of times a day. Once the lip hardens or wears thin, concrete slips past the piston instead of travelling down the pipe: output drops, the pump labours, and slurry starts appearing in places that should stay clean. As a concrete pump seal manufacturer, we supply this size so pump distributors, service workshops and fleet maintenance teams can have it on the shelf before a machine stops, not after.

Specifications

Part name DN120 delivery piston seal
OEM reference 082308005
Nominal diameter DN120 / Ø120 mm
Component type Delivery piston seal (ram seal)
Seal style Lip-type ram seal
Position Delivery cylinder piston, wet end
Operating medium Abrasive concrete mix
Application Putzmeister concrete pump delivery cylinders
Category Concrete pump spare parts
Supply type Aftermarket replacement
Supplied as Seal only
Brand reference Putzmeister is a trademark of its owner

Fitment & Related Parts

  • Start from the OEM number. The reference printed on the old seal, in the parts book or on the invoice is the fastest way to be certain. If the number on your machine matches the one in the specification table, you are ordering the right seal.
  • Measure before you trust a photograph. Read across the delivery cylinder bore and across the old seal. A figure close to the nominal diameter in the specification table puts you in this size; a reading nearer 150, 200 or 230 mm means you need a different seal from the same family.
  • Neighbouring sizes are not interchangeable. This seal will not fit a DN150 or DN200 bore, even though the parts look almost identical in a photograph — each diameter is a separate part with its own listing.
  • Look at the piston the seal sits on. The seal is only as good as the groove and face it is pressed onto. Scoring, a battered piston face or a groove that no longer holds the lip square will destroy a new seal within a short running time.
  • Check the bore while the piston is out. Run a fingernail along the cylinder wall. Light polishing is normal; anything you can catch, an oval bore or set concrete at the mouth, needs attention before a new ram seal goes back in.
  • Send a photo when the number has worn off. A picture of the old seal beside a rule, together with the pump model, is usually enough for us to identify the size and tell you what else in that cylinder is likely to need replacing at the same time.

Wear Signs & Replacement Timing

A seal rarely fails without warning. The usual first sign is a slow loss of output: the pump still builds pressure, but the concrete moves more slowly than it did and the operator has to work the throttle harder to hold the same rate. Some crews notice the change in the water box before they notice it on the pour — grey slurry where the water should be clear is concrete getting past the piston.

On the bench, the seal tells its own story. The lip may be glazed and hard, flattened across the working face, cracked at the edge, or torn where a piece of aggregate has been dragged through it. Wear that is heavy on one side only usually supports something else: a scored bore, a piston that no longer sits square, or a guide ring that has already gone.

Change the DN120 delivery piston seal at your scheduled service interval, and immediately if output falls or material starts bypassing it. A seal caught early protects the cylinder bore, the piston and the water box behind it; one left in service until it tears takes the piston with it and turns a small job into a cylinder rebuild.

Installation & Running-In

  1. Park the pump on firm, level ground, shut it down and release hydraulic pressure before opening anything; lock the controls out so nobody can start the machine while your hands are inside the cylinder.
  2. Pump out the remaining concrete and wash the delivery cylinder, then withdraw the piston and ram assembly and keep the spacers or shims in the order they came off.
  3. Scrape the old seal out of its groove without gouging the piston face, and clean both the groove and the cylinder bore until no set concrete or grit is left.
  4. Check the bore with a fingernail for scoring, and inspect the piston face and groove for damage. If either is worn, fit the replacement parts now rather than after the new seal has already failed.
  5. Confirm that the new DN120 delivery piston seal matches the bore you measured, and that the lip will face the concrete side once the piston is back in place.
  6. Wet the seal with clean water or the assembly lubricant named in the pump manual, seat it squarely in the groove and work the lip in by hand — a twisted or pinched seal will leak from the first stroke.
  7. Reassemble to the torque figures in the pump manual, reconnect the delivery line and prime the cylinder with grout or mortar before concrete is pumped through it.
  8. Run the pump slowly for the first few strokes, watch the piston face and the water box for seepage, and re-check the fittings once the machine has warmed up.

Ordering, Payment & Shipping

Payment T/T or L/C
Dispatch Normally 3–5 days after the order is confirmed
Carriers FedEx, DHL, EMS or UPS
Transit time Usually 3–7 days
Tracking Carrier name and tracking number sent when the parcel ships
Delivery coverage Worldwide shipping
Possible delays Public holidays or events outside our control can add a few days
Address requirements Complete and correct delivery details before dispatch

After-Sales, Contact & Documents

  • Inspect the parcel as soon as it lands. Check the seal against your order while the packaging is still open, and raise anything wrong within 15 days of receipt. - Email before returning anything. We confirm the return address first; the buyer covers return shipping unless the part arrived faulty or damaged, and the refund is issued once the return has been checked. - WhatsApp for a quick answer. +86 19545516660 reaches the parts desk directly, which is usually the fastest route when a machine is standing and you need to know whether an order has shipped. - Email for dimensions, photos and quotations. joak816@outlook.com — the desk answers questions on sizes and materials and can quote a mixed order of seals, pistons and hydraulic parts together. - Ask for the catalogue. The full parts list covering Putzmeister, Schwing, Sany, Zoomlion and CIFA machines is available on request and is the quickest way to see what else in the same cylinder you may want to add. - Buy from the maker. We are a concrete pump seal manufacturer and exporter, so this seal reaches you from our own production rather than from another trader's shelf.

Technical Support & Model Matching

Not sure a part will fit? Send us the OEM number, the machine model or a photo of the part you are replacing, and our technical team will check it against our records and confirm before you order. Founded in 2009, CZIC GROUP supplies construction machinery spares worldwide, with agents in more than 20 countries. We help buyers with part matching, fault diagnosis and installation or commissioning questions, before and after they order.

Specs

  • OEM: 082308005
  • Part name: Delivery Piston Seal DN120
  • Size: DN120
  • Brand reference: Putzmeister (aftermarket replacement)

FAQ

Is this made by Putzmeister?

No. It is an aftermarket replacement referenced to Putzmeister OEM number 082308005.

Does the seal come with a guide ring?

This listing is the seal on its own. Some Putzmeister piston assemblies run a separate guide ring behind the seal and others do not, so send us the pump model or the numbers you have and we will tell you what your cylinder carries and whether a ring is needed with it.

How do I tell whether the seal or the piston ram is worn?

Look at the two separately. A worn seal shows a hardened, glazed or torn lip, flattening across the working face, or a piece missing at the edge, while the piston underneath can still be perfect. A worn piston shows scoring, a battered face, or a groove that no longer holds the seal square. If the piston is damaged, a new seal will not last — replace both.

Is a delivery piston seal the same thing as a ram seal?

Yes. Ram seal, piston seal and delivery piston seal are three names for the same component, the seal on the concrete-side piston. If you have been looking for a 120 mm delivery piston seal for concrete pump maintenance under the name ram seal, this is that part.

What should the cylinder bore look like before a new seal goes in?

Smooth, clean and free of set concrete. Light polishing marks are normal service wear. Deep score lines, an oval bore or a burr at the cylinder mouth will shorten the life of any new seal, so deal with them before fitting this one — otherwise the replacement will fail in the same way as the part it replaced.

You can send money by T/T Or L/C
We have been committed to providing customers with fast, reliable logistics delivery services.
Shipping & Tracking
We normally dispatch parts within 3–5 days after receiving your order. Once your order ships, we send you the carrier name and tracking number.
Most orders ship by FedEx, DHL, EMS or UPS and take 3–7 days to arrive. Holidays or events beyond our control (such as earthquakes or hurricanes) may add a few days.
Please make sure your shipping address and contact details are complete and correct.
The carrier name and tracking number are in your shipping confirmation email, and you can track the parcel on the carrier's website.
Returns & Refunds
We offer a 15-day guarantee from receipt of the parts. Please check the parts as soon as they arrive.
Before returning anything, contact us by email and we will send you the return address. The buyer pays return shipping unless the parts arrived faulty or damaged.
Once we receive the return and confirm there is no problem, we refund you. The refund reaches your payment account within a few days.
Whatsapp:+86 19545516660
Email:joak816@outlook.com
  • 082308005 Delivery Piston Seal Ø 120
  • 082308005 Delivery Piston Seal Ø 120, two pieces

Download

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name
Email *
Message
Leave a message
Name
Email *
Message
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us