• 086632007 Delivery Piston Seal Ø 280
  • 086632007 Delivery Piston Seal Ø 280
  • 086632007 Delivery Piston Seal Ø 280
  • 086632007 Delivery Piston Seal Ø 280

086632007 Delivery Piston Seal Ø 280

No.086632007

Category: Putzmeister Spare Parts

Part Name: Piston Seal DN 280

OEM NO.: 086632007

  • Description

  • Payment Method

  • Shipping&Returns

  • Contact Us

Product Overview

This delivery piston seal is the sealing component fitted to the delivery piston in the concrete pump delivery cylinder. It is listed for Putzmeister concrete pump applications that call for the OEM reference for this part, and it is an aftermarket replacement, not made by Putzmeister. Its size places it at the large-diameter end of the delivery seal range, so it is used where the piston and cylinder bore are built around that nominal diameter. It is not a guide ring, O-ring, piston ram or complete piston assembly; it is the seal that sits on the delivery piston and separates the concrete side from the hydraulic side during the pumping stroke.

A worn seal shows up as pressure loss, concrete bypass at the piston, or slurry reaching places it should not. When that happens, the replacement has to match both the nominal diameter and the OEM reference; this 280 mm piston seal for concrete pump service is not interchangeable with smaller DN230, DN200 or DN120 seals, even when the outline looks similar. The seal works with the piston ram and, on assemblies that use one, a guide ring; as a concrete pump delivery seal supplier, we recommend inspecting those parts during the same rebuild rather than replacing them blind.

Specifications

Part type Delivery piston seal
Nominal size DN280 / Ø280 mm
OEM reference 086632007
Category Concrete pump spare parts
Machine application Putzmeister concrete pump delivery cylinders that specify this part number
Part status Replacement part
Seal position Delivery piston / delivery cylinder
Typical inspection points Guide ring, piston ram and cylinder bore
Brand reference Putzmeister (used for reference only)

Fit & Identification

  • Start with the number on the old seal, the pump model plate and the delivery cylinder size. The diameter should agree before anything else is ordered.
  • Check the full OEM reference, not just the first digits. Similar Putzmeister part numbers can sit close together, and a seal that looks right but carries a different reference will not match the delivery piston.
  • Use the part name as a cross-check: this is a piston seal for the delivery piston, not a guide ring, O-ring, piston ram or hydraulic cylinder seal kit.
  • As a concrete pump delivery seal supplier, we can compare the number you have with our records and tell you whether it matches this seal.
  • Send a clear photo of the old seal, the stamped number and the pump model plate if the number is unreadable. We confirm fit before dispatch so your workshop is not left with a part that cannot be used.

Wear Signs & Replacement Timing

A worn DN280 delivery piston seal rarely fails without warning. Operators usually notice a gradual loss of pumping pressure, a change in the sound of the stroke, concrete starting to bypass the piston, or slurry appearing where the delivery side should be dry. In a workshop inspection, look for cuts, flat spots, hardening, swelling or uneven wear around the sealing lip. Once the seal is passing material, the problem can move beyond the seal itself: abrasive slurry can reach the piston, guide ring or cylinder bore and turn a simple seal change into a longer repair.

Replace the seal at the first confirmed sign of bypass, and treat scheduled cylinder rebuilds as the safer time to renew it. A Putzmeister concrete pump seal that has been stored for a long time should still be checked for distortion or surface damage before fitting. If the piston ram or guide ring is scored, pitted or worn, renewing only the seal will not restore a clean sealing surface; inspect those parts while the piston is out.

Installation & Commissioning

  1. Lock out the pump and release hydraulic pressure before opening the delivery cylinder. Follow the machine manual for isolation and support the piston before it is moved.
  2. Remove the delivery piston and take out the old seal. Keep the piston, guide ring and any spacers together so they go back in the same order.
  3. Clean the piston groove, guide ring seat and cylinder bore. Remove hardened concrete and slurry without scoring the sealing surfaces.
  4. Set the piston seal into its groove and check that it sits square, with no twisted lip or trapped grit.
  5. Make sure the Putzmeister concrete pump seal is seated fully before the piston goes back into the cylinder; a seal that rolls during insertion will leak again.
  6. Lubricate the sealing surfaces with a medium compatible with the pump and concrete service, then reassemble the piston and guide ring as the manual requires.
  7. Run the pump through a low-pressure check, watch for bypass or leaks, and confirm normal pressure build-up before returning to full service.

Spares & Maintenance Planning

  • Keep a piston seal for concrete pump maintenance on the shelf if your fleet runs these delivery cylinders; a delayed seal can keep a pump idle longer than the repair itself.
  • Inspect the guide ring, piston ram and cylinder bore each time the seal is changed. Replacing the seal on a scored piston usually shortens the next service interval.
  • Store seals flat, away from direct sunlight, heat and oily workshop surfaces. Do not hang them on hooks or crush them under other parts.
  • Record the OEM reference, pump model and service date for each seal you fit. That record makes the next order faster and helps you spot a repeat failure early.
  • As a concrete pump delivery seal supplier, we can help you build a small wear-part stock list around your pump models, including seals, guide rings and piston parts.

Ordering & Delivery

Payment T/T or L/C
Dispatch Normally within 3-5 days after order confirmation
Carriers FedEx, DHL, EMS or UPS
Transit time Usually 3-7 days after dispatch; holidays or events beyond our control may add a few days
Tracking Carrier name and tracking number sent when the order ships
Shipping coverage Worldwide shipping
Returns window 15 days from receipt
Return condition Contact us before returning; buyer pays return shipping unless the part arrived faulty or damaged
Refund Issued after we receive the return and confirm there is no problem; reaches your payment account within a few days
Contact us WhatsApp +86 19545516660; email joak816@outlook.com
Download Current spare-parts catalogue available from our site

Technical Support & Model Matching

Not sure a part will fit? Send us the OEM number, the machine model or a photo of the part you are replacing, and our technical team will check it against our records and confirm before you order. Founded in 2009, CZIC GROUP supplies construction machinery spares worldwide, with agents in more than 20 countries. We help buyers with part matching, fault diagnosis and installation or commissioning questions, before and after they order.

Specs

  • OEM: 086632007
  • Part name: Delivery Piston Seal DN280
  • Size: DN280
  • Brand reference: Putzmeister (aftermarket replacement)

FAQ

What size is this seal?

It is a DN280 / Ø280 delivery piston seal. The DN figure is the nominal diameter, so it belongs on the delivery piston assembly for that size. Check the old seal and the delivery cylinder size before ordering, because smaller seals will not substitute.

Will this Putzmeister concrete pump seal fit my pump?

It fits Putzmeister concrete pump delivery cylinders that specify the OEM reference listed for this seal. Send the pump model and the number from the old seal so the fit can be checked before dispatch. It is not a universal seal, and the diameter alone is not enough to confirm it.

Is this made by Putzmeister?

No. It is an aftermarket replacement referenced to Putzmeister OEM number 086632007.

Does the seal come with a guide ring?

The seal is supplied as the piston seal. If your delivery piston assembly uses a guide ring, inspect it during the same rebuild and ask our team to confirm the matching item. We can check the guide ring, piston ram and seal together from your pump model and OEM reference.

You can send money by T/T Or L/C
We have been committed to providing customers with fast, reliable logistics delivery services.
Shipping & Tracking
We normally dispatch parts within 3–5 days after receiving your order. Once your order ships, we send you the carrier name and tracking number.
Most orders ship by FedEx, DHL, EMS or UPS and take 3–7 days to arrive. Holidays or events beyond our control (such as earthquakes or hurricanes) may add a few days.
Please make sure your shipping address and contact details are complete and correct.
The carrier name and tracking number are in your shipping confirmation email, and you can track the parcel on the carrier's website.
Returns & Refunds
We offer a 15-day guarantee from receipt of the parts. Please check the parts as soon as they arrive.
Before returning anything, contact us by email and we will send you the return address. The buyer pays return shipping unless the parts arrived faulty or damaged.
Once we receive the return and confirm there is no problem, we refund you. The refund reaches your payment account within a few days.
Whatsapp:+86 19545516660
Email:joak816@outlook.com
  • 086632007 Delivery Piston Seal Ø 280
  • 086632007 Delivery Piston Seal Ø 280

Download

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name
Email *
Message
Leave a message
Name
Email *
Message
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us